Home / News / Faucet installation skills

Faucet installation skills

First, please have experienced and qualified professionals to install. Especially imported high-end products, there are many small washers and small accessories, and they must be installed step by step according to the drawings to ensure that there will be no problems such as water leakage.

Second, when installing, the faucet should try not to hit hard objects, and do not leave cement, glue, etc. on the surface, so as not to damage the gloss of the surface coating.

Third, if your faucet is used in a newly built house, because the water supply pipe network is newly paved, there will definitely be impurities such as sand particles in the water. Before installation, please pay attention to remove the debris in the pipes and release the water for a long time until the water quality becomes clear. Faucet.

Fourth, do not use excessive force to cause artificial damage when opening and using, just turn it gently. Even the traditional faucet does not need to be screwed with great effort. After normal use, the surface of the faucet should be wiped clean. Do not use the faucet handle as a handrail to support or use.

Fifth, if the water pressure is not less than 0.02mpa, after a period of use, if the water output is found to decrease, or even the water heater is turned off, cut off the flow of cold and hot water, and use a wrench to gently unscrew the water at the water outlet of the faucet The mouth screen cover, after cleaning the impurities, carefully install it, and it will generally recover as before.

Sixth, the metal hose of the shower head of the bathtub faucet should be kept in a natural stretched state, and do not coil it on the faucet when not in use. At the same time, when in use or not, be careful not to form a dead angle at the joint between the hose and the valve body to avoid breaking or damaging the hose.

Seventh, do not use acid or alkaline solvents when scrubbing the faucet. After the faucet has been used for a period of time, if the water output is found to be reduced, use a wrench to unscrew the faucet filter, clean the impurities, and then install it carefully.

Contact Us

*We respect your confidentiality and all information are protected.